top of page
  • Suitable as an upgrade for LS1 LS2 LS3 L76 L77 L98 powered Holden Commodore & HSV V8 VT VX VY VZ VE VF

    Set of 16 GM/Delphi LS7 style replacement stock lifters for all VT-VF LS1 LS2 LS3 L76 L77 L98. These lifters are the replacement part for anyone looking to upgrade their LS engine with a new set of GM lifters. They are also a great option for those wanting to remove the factory AFM/DOD lifters from their L76 or L77 engine (as part of a AFM/DOD removal). These lifters have several upgrades that make them a perfect addition to your LS engine build.

    Delphi Roller Hydraulic Valve Lifters (RHVL) are valve train components that convert the rotation of the cam shaft into linear motion. The roller provides minimal friction at the cam/lifter interface. Delphi RHVL automatically eliminate clearance between valve train components to provide an adjustment and a maintenance-free system. The key to the automatically adjusting system is a high pressure chamber and the control of engine oil out of, and into, the chamber. A plunger that resides in the lifter body has a precise clearance to the body, forming an annulus. When the plunger is loaded during valve lift, oil is expelled through the annulus. During valve lift, the plunger expels oil allowing the plunger to displace a small distance within the body. When the engine valve closes and the load is removed, the plunger spring and oil pressure keep the valve train components in contact. The plunger moves within the body to recover the distance that the plunger traveled during loading, plus or minus any changes that may have occurred. The check valve opens and refills the chamber. This process is repeated for every valve event providing continuous automatic adjustment.

    Delphi's RHVL also feature a metered oil supply for lubrication of the engine overhead through the push rod. The metering valve is designed to minimize sensitivity to contamination.

     

    Benefits:

    Anti-varnish design minimizes sensitivity to accumulation of dirt, gum and varnish
    Chrome alloy ball check valve provides more precise valve opening and closing events
    Hardened steel body and plunger minimize wear for life-of-engine service
    Low-friction roller bearing helps maximize fuel economy
    Roller surface is optimized to minimize the cost of cam lobe processing without loss of performance
    Oil metering provides lubrication to push rod interfaces and other valve train components
    Optimized dynamic performance design enables better control of the valve event at all engine speeds
    Optimized to minimize occurrence of cold start noise with adequate oil supply

     

    Specifications:

    Set of 16 LS7 type lifters for LS-Series engines
    Maximum engine operating speed 6,000+ rpm (typical)
    Roller follower material High alloy bearing steel
    Roller follower crown radius 585 mm
    Roller follower diameter 17.775 mm
    Recommended maximum Hertzian contact stress 1,900 MPa with steel cam
    1,650 MPa with austempered ductile iron cam
    1,550 MPa with nodular iron cam
    Oil supply pressure 100-500 kPa (typical)
    Body outside diameter 21.4 mm (standard)
    12 month warranty

     

    Fitment notes:

    Suitable as an upgrade for LS1 LS2 LS3 L76 L77 L98 powered Holden Commodore & HSV V8 VT VX VY VZ VE VF
    L76 & L77 only suitable as a replacement when removing AFM/DOD system.

 

  • Genuine LS7 Delphi Lifters, made in the USA with Gold Circlip. These are a genuine lifter, however you must soak in oil 24 hours before use. You must check preload, lifter bore etc. before install. These do not come with any warranty due to too many variables that can affect lifter install.
  • https://www.enginebuildermag.com/2011/06/getting-to-the-bottom-of-hydraulic-lifter-preload/ more information here.

16 USA Roller Hydraulic Valve Lifters Holden Ute VE SS SSV V8 L98 L77 L76 6.0L

AU$250.00Price
    bottom of page