LS1 head gaskets, bolts, lifters and guides kit | Holden Commodore VY 5.7L V8
LS7 lifter back order: LS7 lifters are currently on back order. Until we receive more Delphi LS7 lifter stock, this product is supplied with the higher-grade Morel 7717 LS7 lifters. The price has been increased to cover this.
A head gasket, bolt, lifter and lifter guide kit for the Holden Commodore VY with the 5.7L Gen3 LS1 V8.
The lifters are American-made Johnson HYLIFT performance lifters (not ACDelco/GM branded), a very good lifter that supports aftermarket camshaft upgrades.
What is included
- LS1 head gaskets
- Head bolts
- Roller hydraulic lifters (LS7-style, set of 16)
- Lifter guides
Features
- Anti-varnish design minimises sensitivity to dirt, gum and varnish build-up
- Chrome alloy ball check valve for more precise valve opening and closing events
- Hardened steel body and plunger to minimise wear for life-of-engine service
- Low-friction roller bearing helps maximise fuel economy
- Oil metering lubricates the pushrod interfaces and other valvetrain parts
- Designed to keep cold-start noise down with an adequate oil supply
Specifications
- Set of 16 LS7-type lifters for LS-series engines
- Maximum engine operating speed 6,000+ rpm (typical)
- Roller follower material: high alloy bearing steel
- Roller follower crown radius 585 mm, diameter 17.775 mm
- Recommended maximum Hertzian contact stress: 1,900 MPa with a steel cam, 1,650 MPa with an austempered ductile iron cam, 1,550 MPa with a nodular iron cam
- Oil supply pressure 100-500 kPa (typical)
- Body outside diameter 21.4 mm (standard)
Vehicle fitment guide
| Make | Model | Series | Engine | Years |
|---|---|---|---|---|
| Holden | Commodore | VY | LS1 5.7L Gen3 V8 | 2002–2004 |
Important notes
- The exact kit contents follow the product title and the option you choose. Message us to confirm before ordering.
- If the lifters are noisy after installation and run-in, an oil conditioner is recommended, and a higher-flow oil pump (10% to 25% higher flow) may be needed as the kilometres build up.
Warranty: 12 months on parts. No labour warranty unless the work is done by Revhigh in Victoria.
Need it fitted? We install and tune at our Dandenong South workshop. Message us for a quote.

