Revhigh Street Dominator Stage 2 Camshaft 225/236 114 LSA - Holden VE VF V8
Based on the famous Texas Speed (TSP) LS3 camshaft, now offered by Revhigh with an added heat coating for maximum lifespan. It is designed to make more power than the stock camshaft, even in the lower RPM band, with a nice lump/lope at idle.
Choose in the drop-down
- Add Valve Springs: PAC single springs .600", Melling dual springs .600", Melling dual springs .660", or no valve springs.
- Add LS7 Lifters and Buckets: choose with or without.
- Add Cam Sprocket, Chain and ARP Bolts: choose with or without.
- Add gasket top and bottom seal kit with head bolts: Yes or No.
- Add Melling 10% performance pump: Yes or No.
What is included
- Revhigh Stage 2 225/236 camshaft with heat coating
- Any extras you choose in the drop-downs above
Features
- The largest cam we recommend for anyone running the factory torque converter in auto-equipped vehicles
- An excellent choice for manual cars wanting maximum streetability, no bucking
- Great drivability with some great chop at idle
- Gains of 40kW / 70HP and 60Nm of torque
- Stock 6.0L at the wheels 220rwkW, after 320rwkW with full exhaust and intake. Stock 6.2L 245rwkW, after 335rwkW with full exhaust and intake
- Ported Blackwell heads are available as an exchange for an extra 20-25rwkW. Message us for pricing
Specifications
| Spec | Value |
| Duration (intake/exhaust) | 225/236 |
| Lift (intake/exhaust) | .629" / .615" |
| Lobe separation angle | 114 |
| Intake centreline | 109 ICL |
| Best suited engines | 6.0L, 6.2L with rectangular port heads |
| Desired compression ratio | 10.5:1+ |
| Recommended springs | PAC .660 dual valve spring |
| Aftermarket stall converter | Not required, factory converter friendly |
| Upgraded rear gear | Not required |
| Operating RPM range | 1600-6800 |
| Camshaft pattern | 3-bolt |
Fitment
| Make | Model | Series | Engine | Years |
| Holden | Commodore | VE / VF | V8 6.0L, 6.2L: L77, L76, LS3, LS2 (L92/LS3 rectangle port heads) | Confirm with us |
Important
- Recommended for L77, L76, LS3 or LS2 engines using L92/LS3 rectangle port cylinder heads.
- This camshaft is only offered in a 3-bolt design. If you have a single-bolt factory camshaft you need the three-bolt conversion kit (supplies the correct 4x upper timing gear for the camshaft position signal) and the ARP camshaft bolt kit (three bolts). We also offer the conversion kit with a complete upgraded timing set.
- A tune is recommended after fitting an aftermarket camshaft.
Warranty: 12 months on parts, subject to inspection.
Need it fitted? We install and tune at our Dandenong South workshop. Message us for a quote.
Revhigh 225/236 114 LSA Performance Camshaft Holden VE VF V8 6.0L 6.2L
$300.00Price
No Reviews YetShare your thoughts.
Be the first to leave a review.

