Genuine GM Timing Chain Kit – Holden VZ Calais 3.6L Alloytec LY7 V6
Complete timing chain kit for the Holden VZ Calais 3.6L Alloytec LY7 V6, built around Genuine GM (ACDelco) chains and tensioners. Stretched chains cause rattle on start-up, timing fault codes (P0008, P0016–P0019) and poor running. This kit replaces all three chains.
In the kit
- 3 x Genuine GM timing chains. 2004–2006 VZ engines can use earlier chains, so we supply the right chains for your build month and year (see also our early roller-style chains)
- 3 x Genuine GM timing chain tensioners
- 6 x revised timing chain guides
- Rocker cover gaskets, timing cover gaskets, grommets and spark plug seals
Please note: the timing chains and tensioners are Genuine GM (ACDelco). The guides, gears and gaskets are quality aftermarket parts.
Add from the drop-down
- Idler and crank gears
- Intake manifold gaskets
- Oil pump (recommended): the oil pump supplied is the Revlube Performance High Pressure (+6%) oil pump with upgraded internals, more flow and a race coating. Recommended for all engines to maintain adequate oil pressure as they age.
- Water pump
- RTV silicone and oil filter
- 10L Revlube full synthetic 5W-40 engine oil
VVT gears are sold separately. We also stock sensors, rebuild kits and performance parts.
Fitment
| Make | Model | Series | Engine |
| Holden | Commodore, Calais, Berlina, Crewman, One Tonner, Adventra | VZ | 3.6L Alloytec V6 LY7 / LE0 |
| Holden | Commodore, Calais, Berlina, Omega, Evoke | VE | 3.6L Alloytec V6 LY7 / LE0 |
| Holden | Commodore, Calais, Berlina, Omega | VE II | 3.6L SIDI V6 LLT, 3.0L SIDI V6 LF1 |
| Holden | Commodore, Calais, SV6 | VE II / VF | 3.6L SIDI V6 LFX, 3.0L SIDI V6 LFW |
| Holden | Statesman, Caprice | WM / WN | 3.6L V6 LY7 / LLT / LFX |
| Holden | Rodeo / Colorado | RA / RC | 3.6L Alloytec V6 LCA |
| Holden | Captiva | CG | 3.2L Alloytec V6 LU1 |
| Alfa Romeo | Brera, 159, Spider | 939 | 3.2L JTS V6 939A0 |
Before you order
- Put your build month and year in the notes at checkout. Without it your order may be delayed.
- VZ and early VE oil pumps may have a plastic guide. It cracks over time, so don't re-use it: buy a new oil pump with the updated metal guide.
- We recommend dropping and cleaning the sump on every timing chain job, and replacing the oil pickup O-ring.
- The front timing cover and sump need engine sealant.
We use these chains in our 9000rpm naturally aspirated VF SV6 race engines and in supercharged and turbocharged V6 builds making over 400kW. We fit them in our workshop and supply workshops Australia-wide.
Warranty: 12 months on parts. No labour warranty unless the work is done by Revhigh in Victoria.
Need it fitted? We install timing chains at our Dandenong South workshop. Contact us to book.
Video: What's included in our Genuine Holden V6 timing chain kits (YouTube)
Related reading

